New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows & Doors Henderson pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Why Henderson Homeowners Choose CGI Windows & Doors
CGI windows and doors in Henderson are serviced and installed here by Westlight Windows & Doors, an independent local provider that works on the CGI line every week. We are not affiliated with, sponsored by, or authorized by CGI, and nothing we do carries their endorsement. What we offer instead is hands-on familiarity with the products themselves: the Sentinel impact single-hung and double-hung, the horizontal roller sliders, the 3-panel units, and the casement and awning lines, measured, sourced, retrofitted and adjusted in Southern Nevada homes where the desert works against them.
That matters in a place where the same sun that pushes summer afternoons past 110°F bakes west- and south-facing glass until sealed units fog and door finishes chalk. Henderson doesn’t wear windows out with cold. It wears them out with UV, dust and temperature swings, and CGI products respond to those pressures in predictable ways once you’ve handled enough of them. Our technicians have up to 17 years of experience with vinyl window hardware, glazing and sealing, and every job starts with a written price before anything is touched. Call (844) 797-3435 and a live person answers, any hour.
Why Trust Westlight Windows & Doors Henderson for Your CGI Windows & Doors?
We’re an independently owned and operated Kingswell location, which means the promises come in writing and the work is guaranteed in writing. A written price before any work starts. A committed arrival window, kept. A clean site when we leave. A written guarantee handed over at completion, and if a repair fails inside the guarantee period, we come back at no charge. No revised invoices at the door, and no negotiating to get a return visit you already paid for.
CGI-specific experience is the other half of it. We know which hardware wears first on a horizontal roller, what a flat-spotted nylon roller feels like under the hand, why a west-facing sealed unit fogs years before its neighbor on the shaded side, and where the felt pile on a slider gives up first. Service is warranty-safe: we use CGI-matched OEM or equal-quality aftermarket components and sealed units sized to the existing sash, so the work doesn’t create a reason for CGI to walk away from your coverage. When a full-frame replacement is the more honest answer, we say so, and we’ll show you why. We don’t claim local parts stock. Parts are matched to your unit and sourced per job, and you get the price in writing before we order.
We carry eight manufacturer lines, CGI among them, alongside PGT, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru and ViewLux, so a CGI owner isn’t steered toward a different brand just because it’s what someone happens to sell. Background-checked technicians, in uniform, on every job.
Common CGI Windows & Doors Problems We Fix in Henderson
- Roller and track wear on horizontal roller and 3-panel sliding units. The nylon rollers flat-spot and the lower track fills with desert grit, so the sash drags, jumps the track, or won’t seat flush. It’s the most common CGI call we get in Henderson, and it’s almost never a reason to replace the window.
- Glazing seal failure and desiccation on west- and south-facing units. The sealed unit fogs between the panes or the low-E coating degrades under intense summer sun and wide day-night swings, while the sash and frame are perfectly sound. The glass failed. The window didn’t.
- Weatherstripping, sweep and corner-seal degradation on sliders and hung windows. Felt pile and bulb seals compress and crack with heat and age, so fine dust blows in through a closed window and the unit whistles or leaks at the jamb when monsoon rain drives sideways.
- Balance failures on double-hung units. Sash balances lose tension, so the sash slams or drifts down on its own. On the Sentinel impact double-hungs, the sash weight makes a tired balance obvious fast.
- Crank operator and hinge binding on casement and awning units. Lubricant dries out in low humidity, operators stiffen, strip or bind, and a sash that once opened with two fingers now needs a shoulder.
Here’s how it usually presents: a CGI horizontal roller or 3-lite roller starts hanging up on one side. The culprit is flat-spotted rollers and a track packed with dust and grit, sometimes with compressed pile weatherstripping along for the ride. A qualified pro pulls the sash, reconditions or replaces the track, fits new rollers and seals, and realigns the sash so it seats and locks the way it should. When the symptom is fog between the panes instead, the fix is a correctly sized replacement sealed unit set into the existing sash, not a new window.
CGI Parts & Our Repair-vs-Replace Approach
We use CGI-matched OEM or equal-quality aftermarket hardware: rollers, balances, crank operators, weatherstripping, sweeps and screens. Generic hardware-store substitutes are cheaper and they fail faster in this climate, so we don’t put them in. Glazing gets replaced with a sealed unit sized to your existing sash, matched to the original spec where the original spec still makes sense for a Henderson exposure.
Repair is the honest call when the frame, sashes and glazing are sound and only hardware or seals have failed. Full-frame replacement starts making sense when frames are cracked or bowed, or when the units are original single-pane glass and you’re paying to cool the outdoors. We’ll tell you which one you’re looking at before anyone quotes anything. Call (844) 797-3435 for a free estimate, and the price you get is the price you pay.
Our CGI Service Process – Step by Step
- 1
Diagnosis. We identify your CGI model and series, then separate hardware failure from glazing failure from seal failure. A dragging slider and a fogged slider get different conversations.
- 2
Written price. Before any work starts, you get the scope and the number in writing. No revision at the door.
- 3
Repair or install. Sash out, track cleaned and reconditioned or replaced, new CGI-matched rollers, balances, operators or weatherstripping fitted, or the replacement sealed unit set into the existing sash. Full-frame swaps, where they’re the right answer, are flashed and sealed for blowing dust and cloudburst rain.
- 4
Test. Every unit gets cycled, checked for flush seating and locking, and checked for dust and water infiltration at the jamb and sill before we call it done.
- 5
Guarantee. The written guarantee is handed to you at completion. If the work fails inside the period, we return at no charge. That’s the 365-Day Done Right Promise, and it’s automatic.
CGI Products We Service & Install in Henderson
Our CGI work covers the Sentinel vinyl impact single-hung and double-hung windows, CGI horizontal roller (slider) vinyl windows, the CGI 3-panel sliding (3-lite roller) vinyl windows, and CGI vinyl casement and awning windows. That spans the impact-rated units common in newer Henderson construction and the standard vinyl sliders and hung windows throughout 1990s and 2000s tract homes. We also handle vinyl replacement windows as a category, so a mix of CGI and other units on the same house isn’t a problem.
Where Henderson’s exposure matters, we lean on UV-resistant glazing and low-E films (a thin coating that reflects heat back into the room in winter and out in summer) and dust-tight door weatherstripping as the defining local spec, not an upgrade to be talked into.
We Also Service These Brands
CGI is one line of eight. We also service PGT, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru and ViewLux, which means a house with mixed brands gets handled in one visit instead of three. If your CGI unit turns out to be past saving, you’re matched to the right replacement line for the opening and the exposure, not pushed toward whatever a single-brand shop carries.
FAQs – CGI Windows & Doors Service in Henderson
Is Westlight Windows & Doors Henderson authorized by CGI?
No. We’re an independent CGI service provider with no authorization, partnership or warranty endorsement from CGI. We work on CGI products every week and know the line well, but we don’t speak for the manufacturer, and any warranty question goes to CGI directly.
Do you use genuine CGI/OEM parts?
We use CGI-matched OEM components or equal-quality aftermarket hardware, never generic substitutes. Rollers, balances, crank operators and weatherstripping are matched to your unit’s series so the repair holds up in desert conditions and doesn’t jeopardize your coverage.
How long does CGI service take?
Most hardware and seal repairs finish in a single visit once the parts are matched and in hand, which is where scheduling time goes, since we don’t claim local parts stock. Replacement sealed units and full-frame work take longer and get a written timeline before work starts. Call (844) 797-3435 and we’ll give you the schedule in writing.
What CGI models/series do you cover?
Sentinel vinyl impact single-hung and double-hung, horizontal roller sliders, 3-panel sliding units, and vinyl casement and awning windows. If you’re not sure which you have, the model tag on the frame or sash usually settles it.
Will service void my CGI warranty?
Warranty-safe service is the standard we work to, which is why we use matched hardware and correctly sized sealed units rather than cutting corners. What affects coverage is unqualified work and mismatched parts, not service itself. We’ll tell you plainly what we can document for your records.
My CGI sliding window drags and won’t close flush – do I need a new window?
Usually not. A dragging CGI slider is typically flat-spotted nylon rollers and a grit-packed lower track, sometimes with compressed weatherstripping, and all three are replaceable without touching the frame or glass. Call (844) 797-3435 for a free estimate; if a new window is genuinely the right call, we’ll show you why before you spend anything.
Can a fogged CGI sealed unit be replaced without replacing the whole window?
Yes, when the frame and sash are sound. The fog is a failed seal between the panes, not a failed window, so a correctly sized replacement sealed unit set into the existing sash restores clarity and performance at a fraction of full replacement. Call (844) 797-3435 and we’ll confirm from the frame condition.
Are CGI vinyl windows a good fit for Henderson’s heat and sun?
Yes, with the right glazing and sealing for the exposure. CGI’s impact-rated Sentinel line and its UV-resistant glazing options handle desert sun well, but west- and south-facing units still need low-E films and dust-tight weatherstripping to last. It’s a spec question, not a brand question.
What’s the difference between CGI insert replacement and full-frame replacement?
Insert replacement sets a new unit inside the existing frame, which is faster and cheaper when the frame is square and sound. Full-frame replacement pulls the whole assembly out of the stucco wall, which is the right call when frames are cracked or bowed, or when original single-pane glass is due for an upgrade. In Henderson’s stucco-and-slab homes, either path needs proper flashing and sealing against blowing dust.
Why does dust come through my closed CGI slider?
Compressed or cracked felt pile and bulb seals. The seals are the only thing stopping fine dust from the Valley during haboob season, and heat plus age flattens them until a closed window stops being closed. Replacing the weatherstripping and sweeping the sill usually ends it. Call (844) 797-3435 for a free estimate.
How much does CGI windows & doors cost in Henderson?
Hardware and seal repairs are the low end of the range and full-frame replacements are the high end, and the gap is wide because a roller job and a window install are different jobs. You get a written price before any work starts, so the number doesn’t move once the screwdriver comes out. Call (844) 797-3435 for an exact quote – estimates are free.
Book Your CGI Service in Henderson, NV
A dragging slider, a fogged pane or a door that leaks dust all have a fix, and most of them cost less than a full replacement. Call (844) 797-3435 and a live person picks up, day or night. We’ll diagnose the unit, give you the price in writing before anything starts, and stand behind the work in writing when it’s done.
Written by the team at Westlight Windows & Doors.
Six Reasons Homeowners Choose Westlight Windows & Doors Henderson
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.