New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows & Doors Henderson pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
CGI Sliding & Patio Doors: The Henderson Owner’s Guide
We install sliding and patio doors from CGI, and for Henderson homeowners the typical installed price lands between $2,400 and $6,800 depending on size, glass package, and whether the frame is replaced. We can usually get a written quote out to you and schedule the swap within days, not weeks. Most owners discover a failing slider the same way: the door starts dragging on the track in July, the lock no longer lines up in August, and by fall there’s a whistling gap at the jamb that a folded towel won’t fix. It’s rarely one part. It’s wear stacking up on rollers, weatherstripping, and hardware all at once, and Henderson’s heat-and-dust cycle speeds all three along.
Which CGI Models This Applies To
CGI makes sliding and patio doors across several product families, and the part you need is tied to the series, not to the color of the frame. Before we quote anything, we read the manufacturer’s label on the door’s edge or interior jamb; that label carries the model series and glass package, and it’s the single most reliable way to match rollers, locks, and weatherstripping to your exact door. If the label is painted over or missing, we measure roller housing dimensions, track profile, and door panel thickness. CGI’s older and newer lines don’t share every hardware footprint, so a roller that drops into one series can sit too tall or off-center in another and chew up the track in a season.
On the OEM-versus-aftermarket question, we’re straight with you: for high-wear items like rollers and weatherstripping, a quality aftermarket equivalent often costs less and performs the same when the specs match. For locks, handles, and anything tied to the security or the warranty of the panel itself, we lean OEM. CGI compatibility isn’t about a brand name on the package; it’s about dimensional fit. We order per door, we don’t try to force a universal part onto a CGI frame, and we test-fit before the old hardware goes in the trash.
Signs Your CGI Sliding & Patio Doors Is Failing
Sliding doors tell you they’re failing well before they quit. Here’s what Henderson owners report most, and what’s actually going on underneath.
- The door drags or needs a shoulder to slide. Rollers wear flat and collect grit from desert dust, and the track holds the grit that wears them down faster. A door that used to glide with one finger and now needs two hands is usually a roller issue, not a track issue.
- The lock won’t engage or the handle feels loose. The panel has dropped out of square as the rollers settled, so the lock’s strike no longer aligns. Forcing it bends the internal mechanism, and that turns a roller swap into a lock-and-roller job.
- Air or dust comes through the jamb on windy days. Weatherstripping is the softest part on the door and the first to go brittle. Henderson’s summer heat hardens the seal, and once it cracks you’re pulling in dust off the street and losing cool air by the minute.
- Water pools inside the track after rain. Clogged weep holes or a settled threshold let monsoon rain back up. Left alone, water rusts the track fasteners and warps the sill.
- The glass fogs between the panes. That’s a failed seal in an insulated glass unit, not a hardware problem. A fogged slider won’t fail suddenly, but it kills the energy performance you paid for, and here we’re often replacing the glass or the door rather than a part.
Replacement Cost & What’s Included
For Henderson, here’s roughly what sliding and patio door work runs installed. These are the ranges we write on a quote, not ranges we slowly walk upward once the job starts.
| Work | Typical installed range |
|---|---|
| Roller replacement (both panels) | $180 to $340 |
| Lock, handle, and strike hardware | $220 to $420 |
| Weatherstripping and sweep replacement | $160 to $300 |
| Insulated glass unit replacement | $450 to $1,100 |
| Full sliding door replacement (CGI) | $2,400 to $6,800 |
The range widens with door size, panel count, glass package (impact-rated and low-e options both add), and whether the frame and track are being rebuilt. Every quote is line-item, so you see parts and labor separately, and you get that written price before any work starts. Labor includes hauling away the old hardware and cleaning the track. The work itself carries a written guarantee: if it fails within the guarantee period, we come back and fix it at no charge.
DIY or Call Us?
Some checks are safe and smart to do yourself. You can vacuum the track, clear the weep holes, check that the label is readable, and test whether the door slides with one finger. You can look at the weatherstripping and see if it’s cracked.
What goes wrong with DIY on a slider is the removal. Lifting a patio door panel out of its track is a two-person job, and the glass panels are heavy enough to break and cut if a panel slips. Adjusting rollers or resetting a dropped panel sounds simple until the door is 200 pounds of glass leaning away from you. On a second-floor slider, or if you live alone, this is a job to hand to trained technicians. Our crew has up to 17 years of experience with sliding doors and is background-checked and insured, so you know who’s at your door. It’s a few hours of work for us and a real risk for you. When something’s dragging or not latching, call (844) 797-3435 and we’ll take a look.
FAQs
Expect rollers to last roughly 6 to 10 years and weatherstripping to give out sooner, often by the 5-year mark, because Henderson’s heat is hard on soft seals. Glass seals are the wildcard; UV exposure and daily temperature swings shorten their life compared to milder climates.
Often yes. If the panel, glass, and frame are sound, rollers, locks, and weatherstripping are a repair, not a replacement, and that’s the option we quote first. Fogged glass or a cracked or warped panel usually points toward replacement, though.
A roller or lock replacement is usually a 2 to 3 hour visit for a two-panel door. Weatherstripping can stretch to the better part of a day if multiple sides are involved. Full door replacement is a separate, longer install.
We match the part to your door’s label or, if it’s missing, to measured roller and track dimensions, then order it for that fit before we schedule. We don’t stock parts on a truck and we don’t guess; we confirm the series first.
Schedule a Free Estimate
If your CGI slider is dragging, leaking air, or not locking, don’t wait for the next monsoon to find out the seal is gone. Westlight Windows & Doors Henderson is an independently owned and operated Kingswell location, and we’re an independent service provider, not affiliated with CGI itself. Call (844) 797-3435 for a free estimate. You’ll get a written price before any work starts, a real arrival window, and a crew that leaves your track cleaner than they found it.
Written by the team at Westlight Windows & Doors Henderson, serving Henderson and nearby areas.
Six Reasons Homeowners Choose Westlight Windows & Doors Henderson
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.