New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows & Doors Henderson pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Horizontal Roller Windows in Henderson, NV
Horizontal roller windows are sliding windows where one sash glides sideways along a track while the other stays fixed. They’re one of the most common windows in Henderson homes built from the late 1980s through the 2000s, which is why we get more calls about them than almost any other style. Most single horizontal roller replacements in Henderson run $450 – $850 installed, and a whole-house job of six to ten windows usually lands between $3,200 and $7,400 depending on size, glass package, and how much stucco and framing work the opening needs.
We’re an independently owned and operated Kingswell location, and we carry eight manufacturer lines so you’re not stuck with whatever a crew happens to have loaded. If you want to compare this against the wider category first, our Window Installation in Henderson page covers the full picture. If you already know you want rollers, call us at (844) 797-3435 and we’ll get a real person on the line who can schedule an estimate or answer a question about your specific window.
Key Takeaways
- Horizontal rollers are the standard bedroom and living-room window across Henderson neighborhoods like Green Valley, Anthem, and Seven Hills.
- Replacement typically runs $450 – $850 per window installed, with the whole-home price depending on count and glass.
- Failed rollers, tracks, and seals are the three most common reasons people call us.
- Every job gets a written price before work starts and a written guarantee at completion.
- Live phone coverage 24 hours a day, seven days a week.
When You Need Horizontal Roller Windows
Henderson’s climate is hard on these windows in ways that show up fast. The valley hits triple digits every summer, and that heat cycles through the glass and frame hundreds of times a year. Here’s what usually prompts the call:
- The sash is hard to slide or grinds in the track. On older rollers, the nylon wheels flat-spot or the aluminum track wears a groove. If you have to lift the sash to get it moving, the roller assembly is usually shot.
- You can feel the heat through the glass in summer. Single-pane or early double-pane glass in a west- or south-facing window turns a Henderson living room into an oven from May through September. We often replace these with low-e glass (a thin coating that reflects heat back out in summer and holds warmth in during winter) or impact-rated glass from PGT or CGI.
- The seal has failed and the glass looks foggy or milky. That cloudiness is moisture trapped between the panes. Once the seal breaks, the window stops insulating and no amount of cleaning fixes it.
- The frame is warped or the sash won’t sit flush. Intense sun on the west side of a house can warp vinyl frames over time, especially in homes built before about 2005. A warped frame means the sash no longer seals, and the fix is usually replacement rather than repair.
- You’re remodeling a room and want the window to match. Adding a bedroom or converting a den in a Henderson home often means matching the existing horizontal rollers so the elevation looks consistent from the street.
- You’re in a high-wind or fire-rated zone and need impact glass. Parts of Anthem, MacDonald Ranch, and the foothills near Lake Mead see wind events that send debris flying. Impact-rated rollers from PGT or CGI are the standard answer there.
Our Horizontal Roller Windows Process
We don’t wing it, and we don’t hand you a verbal number and hope it sticks. Here’s the sequence on every horizontal roller job:
- Measure and walk the opening with you. We check the rough opening, the existing frame depth, the sill condition, and how the window sits against the stucco. If the opening needs repair before a new window goes in, you hear about it now, not after the crew is on-site.
- Match the product to the job, not the other way around. Between PGT, CGI, CWS, ES Windows, and the other lines we carry, we can usually find the right fit for your budget and your exposure. That might be an energy-efficient ECO Window Systems unit for a shaded north-facing bedroom or an impact-rated PGT for a west-facing wall.
- Put the price in writing. That’s the first promise of the Kingswell Guarantee: you get a written price before any work starts. No revised invoice at the door. No surprise add-ons for disposal or trim.
- Show up in the window we gave you. Second promise. We commit to an arrival window and hold to it. Background-checked, uniformed technicians arrive, and you know exactly who’s walking through your door.
- Install clean and haul away the old unit. Third promise: leave the place cleaner than we found it. Old windows, glass, and debris leave with us.
- Hand you the written guarantee. Fourth promise. If the work fails within the guarantee period, the 365-Day Done Right Promise means we come back and fix it at no charge. No negotiating required.
Our technicians have up to 17 years of experience on window work, and that matters most on the details: setting a level sill, sealing a stucco reveal correctly so the window doesn’t leak during a monsoon, and getting the rollers aligned so the sash glides the way it should. The four values we work by, which we call The Kingswell Way, are simple: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails.
Horizontal Roller Windows Pricing in Henderson
Pricing depends mostly on the glass package, the frame material, and whether we’re replacing into an existing opening or repairing the opening first. Here are the ranges homeowners in Henderson typically see:
| Job | Typical Installed Range |
|---|---|
| Single horizontal roller, standard vinyl, dual-pane | $450 – $750 |
| Single horizontal roller, low-e or impact glass | $650 – $850 |
| Oversized roller (over 6 ft wide) | $750 – $1,150 |
| Whole home, 6 – 10 windows | $3,200 – $7,400 |
| Opening repair before install (rot, stucco damage) | Quoted separately, written before work starts |
A few things move the number:
- Glass type. Dual-pane is the baseline. Low-e, argon-filled, and impact-rated all add cost per window but change the comfort and energy picture in a Henderson summer.
- Frame material and brand. PGT and CGI tend to be the higher tier for impact glass; CWS and ES Windows sit comfortably in the mid-range; ECO Window Systems is where a lot of homeowners land for energy efficiency at a fair price.
- Size and opening count. A wide three-panel roller costs more than a two-panel, and a corner or bay configuration costs more again.
- Access. Second-story windows, tight side yards, and tile roofs add labor. We tell you up front if access is going to affect the quote.
Every quote you get from us is written before work starts, and we don’t revise the price at the door. If you want to see how roller pricing fits with other styles, our home page has the broader overview. Estimates are free. Call (844) 797-3435.
FAQs – Horizontal Roller Windows
How much does a horizontal roller window cost in Henderson?
A single horizontal roller window typically runs $450 – $850 installed in Henderson, depending on size, glass package, and frame material. Whole-home replacements of six to ten windows usually land between $3,200 and $7,400. Call us at (844) 797-3435 for an exact quote. Estimates are free.
Is it cheaper to repair or replace a horizontal roller window?
If only the rollers are worn, a track-and-roller repair is usually the cheaper path; if the seal has failed, the frame has warped, or the glass is foggy, replacement is the better value because you’re paying once instead of twice. We’ll tell you which side of that line your window is on after looking at it, and we’ll put the price for either option in writing. Call (844) 797-3435 to schedule a look.
Can you install horizontal roller windows the same day?
Same-day installation isn’t realistic for most horizontal roller jobs because the units have to be ordered and delivered, but we can usually get an estimator out quickly and give you a real arrival window for the install. If it’s an urgent issue like a broken sash or a window that won’t close, call us and we’ll talk through the fastest path. Live phone coverage is 24 hours a day, seven days a week.
Do you carry impact-rated horizontal rollers for Henderson wind zones?
Yes. We carry impact-rated horizontal rollers from PGT and CGI, which are the common choice for homes near the foothills and in wind-exposed parts of Anthem. If you’re in an area where your HOA or insurer prefers impact glass, we’ll quote it side by side with standard glass so you can see the difference. Call (844) 797-3435 and we’ll walk through the options.
Horizontal roller windows are one of the simplest, most functional window styles you can put in a Henderson home, and getting them right comes down to measuring carefully, sealing properly, and standing behind the work. We answer the phone with a real person, we show up when we say we will, and we hand you a written guarantee when the job is done. Whether you need one window replaced or the whole house, our team is ready to earn the next call: (844) 797-3435 for a free estimate.
Written by the team at Westlight Windows & Doors Henderson, serving Henderson.
Six Reasons Homeowners Choose Westlight Windows & Doors Henderson
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.