New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows & Doors Henderson pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Mr-Glass Door Installation in Henderson: What to Know First
We install Mr-Glass entry, French, and storm doors for Henderson homeowners as an independent Mr-Glass service provider. A typical door installation runs one to two days once the door is on site, and specialty orders – hurricane-rated units, custom widths – can take two to four weeks to arrive. You’ll get a written price before any work starts, and that number doesn’t change at the door.
This page is for Henderson homeowners who already own a Mr-Glass door or have one picked out and need it installed right, without the runaround. We’re an independently owned and operated Kingswell location, and Mr-Glass is one of eight manufacturer lines we install. Call (844) 797-3435 for a free estimate.
How Mr-Glass Products Fail – and How We Fix Them
Mr-Glass doors hold up well when they’re hung correctly, but we see the same handful of problems on installation and repair calls around Henderson. Each points back to a specific cause.
- Sagging slab and rubbing on the strike side. A Mr-Glass entry door that drags near the latch usually has a hinge-side frame that was shimmed too tight at the bottom – often on a stucco opening where the rough frame isn’t plumb. We re-shim the jamb to plumb and reset the hinges rather than trimming the slab, which protects the warranty.
- Water intrusion at the sill on storm and exterior doors. Henderson’s summer monsoon rain drives sideways into door openings, and a sill pan that wasn’t sloped or sealed properly lets water pool under the threshold. You’ll see paint blistering at the interior baseboard first. We pull the door, reset the sill pan with correct slope and flashing, and reinstall.
- French and double doors that won’t meet at the astragal. On double-door units, the inactive leaf’s locking points drift out of alignment when the frame settles. We adjust the astragal and re-plumb both leaves so the mortise lock engages with a single turn.
- Failed weatherstripping and air leaks on retrofit replacements. Desert heat and UV break down foam and bulb seals faster than most owners expect – often within a few seasons on a west-facing door that takes the afternoon sun. We replace the seal with a UV-stable profile and check the sweep.
- Hurricane-proof front and entry door hardware that binds. Multi-point locking hardware on Mr-Glass impact-rated doors needs precise shimming; if the slab is racked even a little, the top and bottom bolts won’t throw. We square the unit in the opening and test every lock point before we call the job done.
Our Mr-Glass Door Installation Process
- 1
Call and schedule. A live person answers, day or night, and locks in a real arrival window – not a vague morning or afternoon.
- 2
On-site measure and written price. We measure the rough opening, confirm the door model and handing, and hand you a written price before anything starts. This is The Kingswell Way: say the price before the work.
- 3
Parts decision. We use OEM Mr-Glass parts where they belong and quality aftermarket hardware where an upgrade makes sense, and we tell you which is which so nothing voids your Mr-Glass warranty.
- 4
Installation. We set the door plumb and square, flash and seal the opening, and background-checked, uniformed technicians do the work from start to finish.
- 5
Test and walkthrough. Every lock point, the sweep, and the weatherstripping get tested before we show you the operation and hand over your written guarantee.
- 6
Cleanup. We leave the site cleaner than we found it – old door hauled off, debris swept, no surprises.
What Mr-Glass Door Installation Costs in Henderson
Here are real installed ranges for the jobs we run most often. Your written price is confirmed at the free estimate.
- Standard entry door installation: $650-$1,200 installed
- Storm and exterior door installation: $500-$950 installed
- French or double-door unit: $1,200-$2,400 installed
- Hurricane-proof front and entry door: $1,400-$3,000 installed
- Full replacement with new frame and trim: add $300-$700
What moves the price: opening size and whether the rough frame needs repair, door style and rating, hardware upgrades, and whether the old unit comes out cleanly. Call (844) 797-3435 for a free estimate – the number we give you is the number we stick to.
Why Henderson Homeowners Call Westlight Windows & Doors Henderson for Mr-Glass Work
Most of the Henderson homeowners who call us have already been let down once – a no-show, a price that jumped at the door, a seal that failed a few months in. So we built the whole job around four promises: written price before work, a real arrival window, a clean site, and a guarantee in writing. That’s the Kingswell Guarantee, and it backs every Mr-Glass job we take on.
If the work isn’t right within 365 days, our Done Right Promise brings us back to fix it at no charge – you don’t negotiate for it. Our technicians have up to 17 years of experience, and because we carry eight manufacturer lines including PGT, CGI, CWS, ES Windows, ECO Window Systems, and Therma-Tru, we match the right product to the job rather than forcing one brand. We’re independently owned and operated, based here in the Henderson area, and a real person picks up the phone 24/7. Westlight is the late-afternoon sun through a good window – bright, warm, and worth doing right.
FAQs
No – a proper installation done to Mr-Glass spec keeps your manufacturer warranty intact, and we use OEM parts where the warranty requires them. We’re an independent Mr-Glass service provider, not affiliated with or authorized by Mr-Glass, so we follow their installation requirements and document the job. Call (844) 797-3435 with your model and we’ll confirm what’s covered.
Yes. We source OEM Mr-Glass hardware and seals, and we’ll tell you honestly when a quality aftermarket part is the better value, so you’re not paying OEM prices where you don’t need to. Parts lead time is usually a few days for common items.
Repair if the slab and frame are sound and the problem is hardware, seals, or alignment – that’s often a same-week fix. Replace if the frame is rotted, the glass seal is fogged, or the door is warped beyond re-shimming. We’ll give you both numbers in writing so the choice is yours.
In-stock doors are typically installed one to two days after your estimate. Custom or hurricane-rated Mr-Glass units take two to four weeks to arrive, then a one to two-day install. We give you a firm arrival window and show up in it.
No. Your price is written before work starts, and we don’t revise quotes at the door. If we hit something unexpected, we talk it through with you first – you’re never handed a surprise invoice. Call (844) 797-3435 for a free estimate.
Get Your Mr-Glass Door Installed Right
Whether you’ve got a Mr-Glass entry door sitting in the garage or a storm door that needs replacing before the next monsoon, we’ll measure, quote it in writing, and install it clean. Call (844) 797-3435 for a free estimate and a real arrival window.
Written by the team at Westlight Windows & Doors Henderson, serving Henderson and nearby areas.
Six Reasons Homeowners Choose Westlight Windows & Doors Henderson
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.