New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows & Doors Henderson pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Mr-Glass Sliding & Patio Doors: The Henderson Owner’s Guide
We install and repair Mr-Glass sliding and patio doors for Henderson homeowners, and a full replacement door unit typically runs $1,850 to $4,900 installed depending on size, glass package, and frame material. Most failed rollers, tracks, and latch hardware can be corrected on a scheduled service visit rather than a same-day emergency call, and we’ll give you a written price before any work starts. You usually find out something’s wrong the first hot week of the year: the door starts dragging at the bottom corner, the latch won’t catch, or you have to lift and shove to get it closed against the jamb. In Henderson, that failure curve lines up with the spring dust and the 110-degree summer swings that work on the rollers and weatherstripping.
Which Mr-Glass Models This Applies To
Mr-Glass builds sliding and patio door units across several frame and glass lines, and the part you need depends on the model family, the panel width, and the vintage of the unit. The fastest way to identify yours is to look for the manufacturer label on the interior head jamb or the top of the sliding panel, then measure the door opening, the panel height and width, and the track-to-track depth. Those three numbers plus the label get us to the right roller, track, or latch assembly without guesswork.
On the OEM-versus-aftermarket question, it matters for Mr-Glass specifically: OEM rollers and latch sets match the factory bore and track profile exactly, while quality aftermarket equivalents often fit but can sit slightly differently in the track. For a door still under warranty or one you plan to keep a long time, we lean OEM. For an older Henderson door where the OEM part is discontinued, a matched aftermarket roller is a sound choice and we’ll tell you plainly which one you’re getting.
We also service and repair sliding and patio doors from PGT, CGI, and CWS if your home has a mix of brands.
Signs Your Mr-Glass Sliding & Patio Doors Is Failing
- The door drags or binds near the bottom. That’s almost always a flat-spotted or seized roller, or grit packed into the lower track from desert dust blowing in through the weep holes.
- The latch won’t engage or pops loose. The strike plate or latch tongue has worn or the door has dropped slightly out of square, so the hardware no longer lines up with the keeper.
- You feel air or heat at the edges. The weatherstripping and pile seal have compressed or cracked. In Henderson heat, these seals harden and fail faster than in milder climates, often within a handful of summers.
- The glass is foggy or has a haze between the panes. The sealed unit’s spacer or seal has failed and moisture has gotten in. The glass has to be replaced; it can’t be dried out or resealed in place.
- The door jumps the track or won’t stay in the channel. A bent track, worn roller housing, or a panel that’s come out of adjustment. Left alone, this is the one that leads to a cracked pane.
One Henderson-specific note: doors on the west- and south-facing walls take the hardest afternoon sun, and that’s where we most often see seals and roller grease break down first.
Replacement Cost & What’s Included
Here’s the honest range for a Henderson Mr-Glass sliding or patio door project, installed:
- Roller replacement (pair): $150 to $320, including hardware and adjustment.
- Track repair or replacement: $220 to $480, depending on length and whether the sill is involved.
- Latch and handle hardware: $120 to $280.
- Glass or sealed-unit replacement: $380 to $900, depending on size and whether it’s impact-rated.
- Full door unit replacement: $1,850 to $4,900 installed, driven by size, glass package, and frame material.
What drives the range is panel size, whether the part is OEM or matched aftermarket, and whether the track or sill needs work. You get a written, line-item price before any work begins, so there are no revised invoices at the door. Workmanship is backed by the 365-Day Done Right Promise: if the repair fails within the guarantee period, we come back and correct it at no charge.
DIY or Call Us?
You can safely handle a few things yourself: vacuum and wipe out the lower track, check that the weep holes are clear, and confirm the door is level by watching whether it drifts open or closed on its own. What tends to go wrong is the hardware work. Sliding and patio door panels are heavy, and a panel that slips off a misaligned roller can crack the glass or land on your foot. Adjusting rollers and replacing a glass sealed unit is a two-person job with the right tools, and it’s where most DIY attempts on a Henderson Mr-Glass door end up costing more than the original repair quote. We handle it with background-checked, uniformed technicians, and we leave the opening cleaner than we found it. Call (844) 797-3435 to schedule a free estimate.
FAQs
Sliding and patio door hardware typically needs service every 5 to 10 years, and the glass seal more like 10 to 15. In Henderson’s heat and dust, rollers and weather seals wear faster than in milder climates, so west- and south-facing doors often fail on the shorter end. Call (844) 797-3435 for a free estimate if yours is showing its age.
Yes, in most cases. Worn rollers, a dragging track, and a loose latch are all repairable without replacing the door, and a foggy pane can be swapped as a sealed unit. If the frame is bent or the glass is cracked in several places, replacement is the better value. Call (844) 797-3435 and we’ll tell you which one fits your door.
A roller or hardware repair usually takes an hour or two, and a full door unit replacement is generally a scheduled half-day to full-day job depending on size and frame work. We give you a committed arrival window up front. Call (844) 797-3435 to get your slot.
We match the part to your model using the manufacturer label plus measurements of the opening, panel, and track depth, then confirm whether an OEM or quality aftermarket part is the right call for your door. We don’t keep a parts warehouse, but we source and verify the correct part before the visit. Call (844) 797-3435 to get started.
Westlight Windows & Doors is an independently owned and operated Kingswell location and an independent service provider, not affiliated with Mr-Glass. We’ve been installing and servicing doors and windows since 2009, our technicians have up to 17 years of experience, and we’re happy to walk you through any Mr-Glass sliding or patio door question for your Henderson home.
Call (844) 797-3435 to schedule your free estimate for your Mr-Glass sliding or patio door in Henderson. Our phone lines are answered by a live person 24 hours a day, 7 days a week, and you’ll get a written price before any work starts.
Written by the team at Westlight Windows & Doors Henderson, serving Henderson and nearby areas.
Six Reasons Homeowners Choose Westlight Windows & Doors Henderson
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.