New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows & Doors Henderson pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
Therma-Tru Sliding & Patio Doors: The Henderson Owner’s Guide
We install and service Therma-Tru sliding and patio doors across Henderson, and most full door replacements land between $1,650 and $4,200 installed depending on size, glass package, and whether the frame is reused. Sliding-door work is scheduled, not dispatched – call (844) 797-3435 and we’ll set a real arrival window, put your price in writing before anything starts, and hand you the written guarantee when the job is done. Most Henderson homeowners find us the same way: the door suddenly drags on the track in July, or the latch won’t catch and the door won’t lock at night, or they feel warm air pouring off the glass at 4 p.m. That’s when the search begins. And more often than the door itself, it’s one part that gave out first.
Which Therma-Tru Models This Applies To
Therma-Tru sliding and patio doors show up in Henderson homes under a handful of family names, and the part you order has to match the series, not just the brand. Their sliding patio lines and hinged patio doors share hardware designs across years, but roller assemblies, track profiles, and glass panel dimensions change between product families and revisions. The fastest way to a correct match is the manufacturer’s label: it lives on the door panel edge or the frame jamb, and it carries the series, size, and a production code. Go by the label and the physical measurements – panel width and height, track depth, roller wheel diameter – before you buy anything.
Then there’s the OEM-versus-aftermarket decision. Genuine Therma-Tru parts run higher, typically $60 to $180 for a roller or latch set, and they fit right the first time. Quality aftermarket equivalents cost less, sometimes half, and are excellent when the spec matches exactly; they’re a gamble when it doesn’t. We source both and tell you honestly which one your door needs. If your door is a PGT, CGI, or CWS product instead, we carry those lines too.
Signs Your Therma-Tru Sliding & Patio Doors Is Failing
These five symptoms cover most of what we see in Henderson, and each one points to a specific failing part.
- The door drags or jumps on the track. Worn or flat-spotted rollers, or a track that’s picked up grit and lost its profile. When one roller seizes, the panel tilts and the whole door fights you.
- The door won’t lock, or the latch misses the keeper. A latch that’s drifted out of alignment or a keeper screw that’s worked loose. This is the one to fix quickly – a patio door that won’t lock is an open invitation in a Henderson neighborhood.
- You can see daylight or feel a draft around the edges. Weatherstripping and the sweep at the bottom flatten out with heat cycling. It’s the cheapest part on the door and the first to go.
- Condensation between the glass panes. That’s a failed insulated glass seal – the unit itself, not the frame. It can’t be wiped away, and the glass has to be replaced as a sealed assembly.
- The screen won’t track or the rollers pop out. Screen rollers and guides wear faster than most people expect because the screen runs constantly and gets leaned on.
Replacement Cost & What’s Included
In Henderson, a roller-and-track refresh on a Therma-Tru slider typically runs $140 to $320 installed. A latch and keeper alignment is often $95 to $175. New weatherstripping and a bottom sweep land around $120 to $260. A full sealed glass unit replacement runs $380 to $850 depending on size and whether you want low-e or impact-rated glass – a real consideration out here, where summer sun hits west-facing doors hard and the valley’s dust works its way into every track. None of these are guesses; they’re the ranges we quote, and the exact number comes to you in writing before any work begins.
Every price we give includes the part, the labor, hauling away the old pieces, and our written guarantee on the work. If a repair fails within the guarantee period, we come back and fix it at no charge – that’s the 365-Day Done Right Promise, and it applies to parts work the same as to full door installations. See our services page for the full picture of what we install and repair.
DIY or Call Us?
Some of this is fair game for a careful owner. You can vacuum and wipe the track, check that the panel sits square in the opening, tighten a loose keeper screw, and confirm the manufacturer label before you order anything. That’s safe, useful information to gather. Where DIY goes wrong is the heavier work: lifting a full glass patio panel out of its track to swap rollers is a two-person job and a serious injury risk if a panel slips, and replacing a sealed glass unit yourself usually ends with a compromised seal and a door that fogs again within a season. If your door won’t lock or the panel is binding hard, stop forcing it and let someone with the right tools look.
Call (844) 797-3435 and we’ll get a written price and a real arrival window to you – no revising the number at the door.
FAQs
Rollers and weatherstripping typically last 6 to 10 years here before they need attention; the desert heat and dust speed up wear compared with coastal climates, so expect the lower end. Sealed glass units are the wildcard – some go 15 years, some fail sooner. Call (844) 797-3435 for an exact quote – estimates are free.
Often, yes. Rollers, latches, tracks, and weatherstripping are all repairable and worth it when the frame and glass are sound. A failed glass seal or a warped frame usually means the assembly has to be replaced. We’ll tell you which situation you’re in before you commit to anything.
Most roller, latch, and weatherstrip jobs finish in an hour or two; a full glass unit replacement may take a few hours. We schedule it, arrive when we said we would, and leave the site cleaner than we found it. Call (844) 797-3435 to get your arrival window.
We identify it from the manufacturer label and physical measurements, then source the OEM or a spec-matched aftermarket equivalent – whichever fits your door and your budget. We don’t carry parts on a truck or stock them locally; we order what your specific door needs. Call (844) 797-3435 and we’ll get started.
Written by the team at Westlight Windows & Doors Henderson, serving Henderson and nearby areas.
Ready to get that door working again? Call (844) 797-3435 at Westlight Windows & Doors Henderson for a free estimate – a real person answers, a real arrival window is set, and a written price and guarantee come with the job. If your patio door is a PGT, CGI, or CWS product, we carry those too.
Six Reasons Homeowners Choose Westlight Windows & Doors Henderson
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.